Daikin KSO Series DC 24V Solenoid Valves

Daikin KSO Series DC 24V Solenoid Valves
QQ20240903162017
QQ20240903162049

Daikin KSO Series DC 24V Solenoid Valves

These models realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 100 L/min (G02) or 160 L/min (G03).

إرسال التحقيق

مقدمة المنتج

QQ20240903162039

--These models realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2 } and 100 L/min (G02) or 160 L/min (G03).

--They are best suited to integration into European Safety Standard (CE) compliant equipment since they have dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

1	2	3	4	5	6	7	8	9	10
*	KSO -	G	**	**	*	*	**	*******	*******

1		No designation: Petroleum-based hydraulic fluid H: Water-glycol hydraulic fluid (Applicable only to G03) (G02 accepts water-glycol hydraulic fluid with no designation.)
2	Model No.
3
4		02: ¼ 03: ⅜
5
6		N: No-spring type (without detent, applicable only to KSO-G02) D: No-spring type (with detent)
7
8	Design No. (The design No. is subject to change)	20: Nominal diameter 03 (⅜) 30: Nominal diameter 02 (¼)
9
10

If two or more options are selected, sort the option codes in alphanumeric order.

*3 The specifications with surge killer are only applicable to voltage codes A to D, J to M, and N to U.

*4 The specifications with surge killer (with resistance) are only applicable to voltage code P.

*5 The applicable voltage codes for CE compliant products (option code: E, EN, ENR, CE, CLE, N-CLE) are as follows. With KSO-G02, CE compliant specifications are available for all voltage codes. With KSO-G03, CE compliant specifications are available only for voltage codes A and P.

*6 The specifications with rectifier with built-in quick return circuit are applicable to voltage codes E and G. This option comes with a dedicated driver. (One dedicated driver is provided for each solenoid.) Driver model: SSQ-101 (for voltage code E) Driver model: SSQ-201 (for voltage code G)

*7 The DIN connector type is only applicable to voltage codes A to D, J to M, and N to U. The specifications with surge killer are only applicable to voltage codes A to D, N, P, and R to U.

*8 With KSO-G02, the lead wire type is only applicable to voltage codes A to D, J to M, and N to U. With KSO-G03, it is only applicable to voltage codes N to U.

*9 The spool locking device is suited to applications where the solenoid valve is switched manually because it enables the spool to be locked in the switched status. Note that the product with this option is not compliant with the CE standards.